Chose your Application:

Plastics Industry

In the plastics industry ECT has proven industry experience ensuring the most efficient designs. Our chillers are installed to cool plastic that is injected, extruded or blown. The equipment used to create a plastic mold may also require cooling allowing the machine to operate more efficiently. This will assist the machine in operating more efficiently and aid in the extension of the life of the machine.

 

Call ECT to help select a chiller based on your requirements to Plastic cooling, mold cooling, injection molding chillers, process cooling equipment, plastic injection molding etc.

Laser Cutting Industry

In the laser cutting industry, light projection industry, etc. a chilling system is required to cool down the lasers and power supply. Lasers are operated at very high temperatures and must be cooled appropriately to function at peak efficiency. For maximum performance and reliability, a laser system requires a stable source of cooling fluid. That is where an ECT chiller is used to give your equipment proper cooling, to ensure your process keeps up with production demands.

 

Winery Industry

ECT designs, builds, and distributes chiller systems directly to the wine-making industry. The process of wine-making is a very sophisticated process that involves complex, precise temperature management. An extreme flux in temperature cause serious issues with your wine making process effecting wine quality.

 

ECT chillers are compact efficient and reliable.  Our chillers look good and do not take up too much space.

Made special for the Wine industry:

 

For decades the wine industry used the Carlyle/Carrier 05F/5H open dive compressors, because of their reliability, quite operation and efficiently. ECT is proud to offer this option with our air-cooled and water cooled designs. Using whisper quite EC motor fans, high efficiency microchannel coils (reduces refrigerant charge by 50%) and using the Carlyle 5F/H compressor with a VFD, you will have one of the quietest, most efficient chillers in the industry.

Bakery & Food Industry

ECT specializes in designing and manufacturing chillers for the food processing and industrial bakery industries. We offer a variety of sizes and configurations that will cost effectively and efficiently accommodate your applications.

 

Controlled mixing temperature has long been used to provide consistent dough rising times for breads and baked goods.

We specialize in designing and manufacturing chillers for the food and beverage industry. Our food processing chillers are used in a range of settings, including in frozen yogurt shops, bakeries, wineries, breweries, and much more.

 

Bakeries have multiple uses for chilled glycol including:

 

Mixer Cooling-Chilled glycol is circulated through a cooling jacket to control the dough-out temperature, Critical to any baker.

 

Sponge Cooling-Chilled glycol is circulated through a plate heat exchanger, cooling Sponge.

 

Chilled Potable Water-Provide 34-35° F Chilled Potable Water from our standard mixer chiller system.

 

Liquid Yeast Cooling-The liquid yeast is stored in jacketed tanks and it is critical to control their temperatures.

Brewery Industry

In the beverage industry, a chiller removes the heat gained from the process during mixing, cooking, or after pasteurizing the product.

 

Recirculating refrigerated fluid chillers are used in the wine and microbrew industry to control temperature in the production of fine table wines and beer. To create these high quality wines and beer the proper temperature must be maintained during the entire production process.

 

Breweries use chilling systems to cool down the hot wort to a lower temperature before it is transferred to a fermentation tank containing the yeast. This is done by passing the hot wort through wort chiller with a plate heat exchanger where the heat from the wort is transferred to cold brewing water.

 

Some brewers are still opting for "pub type chillers", relying on ice banks as the preferred method of cooling. However, by using a glycol chiller (Process Cooling Chiller), brewers using this method of cooling gain from important advantages:

 

-It is easier to control

 

-Provides the results you want quickly

 

-Offers a major cost saving alternative when compared to other cooling methods

 

-Saves you time so you can produce more beer quickly

 

ECT offers solutions to any challenging brewery and microbrewery chiller problems.

Medical Industry

In the medical industry, there are a number of machines that are used such as X-ray, Linear Accelerators and MRI machines (Magnetic resonance imaging). These machines often get hot while in operation and require cooling from a chiller to ensure efficient performance.

7600 Burnet Rd. Ste 301

Austin, TX 78757

Sales Inquiries

sales@ectprocess.com

ventas@ectprocess.com

 

Purchase department:

purchase@ectprocess.com

Sales inquiries only:

Ph. 956-231-3679

Ph. 713-589-3183

 

Miami

Ph. (305) 359 3820

2021 ECT  All Rights Reserved

Chillers - Air handlers Units - Condensing Units - Racks & Retrofits

www.ectprocess.com